Bathroom Vent Cover Removal

By Mike Lang

If your bathroom vent is starting to sound like an engine with various noises coming out from that area, it is a sign that it requires an immediate replacement and maintenance process. Regardless of how good you are in taking care of stuffs, there will be a time when repairs and changes on the device are required. Most of the time, the vent cover is usually full of dirt and debris that are stuck and at times can damage the guard. Learning how you can remove the cover for cleaning, repair, and replacement purposes is important for a more durable and conditioned bathroom vent cover.

Bathroom vents are not necessarily important cooling systems for a bathroom as you can always use an exhaust fan for this purpose. However, these can be great additions to your ventilation system as they can provide various benefits for the homeowner. Fixing bathroom vent fans can be quite easy; however you must have to remove the cover first in order to get to the actual job of doing the repairs. Below are some easy steps and hints on how you can successfully clean, fix, and replace your vent fan by removing its cover.

[youtube]http://www.youtube.com/watch?v=rnGK-xqP43U[/youtube]

— Switch Off Power – before you climb to remove the cover of the bathroom vent, make sure that the power is switched off for your safety. Do not work on the maintenance process unless the device is properly shut down to avoid any accidents during the task. There are many people who tend to forget this simple safety precaution which is why there are lots of cases where individuals get electrocuted as they work on their device. Another best way to make sure that this type of accident would never happen is to unplug the cord to remove any connection to the power source.

— Tools – a ladder and a screwdriver are the two most essential yet basic tools you will need for this project. Make sure that your ladder is durable and does not wiggle as you step and climb up to reach the cover of the bathroom vent. This is to prevent any risks of accidental falling due to a shaking ladder. A standard length screwdriver is very important to have if you want to make the job easier and a lot simpler.

— Remove Cover – as you safely climb up the ladder, pull out your screwdriver and slowly remove the vent cover’s screw. This will allow you to unlock and pull out the cover easily. Do not force the screw to loosen up as this may damage the screws on some cases.

— Clean, Repair, and Replace – whatever the purpose may be for the removal of the bathroom vent cover, it should be properly done before you put back the cover in its place. Aside from maintaining cleanliness, fixing broken parts and the replacement of old devices, you should also conduct a thorough inspection of the whole vent system to make sure that it is functional, in top condition, and would last for longer years in service. After you are through, you can now put back the vent cover in its place using the screwdriver.

About the Author: I write for TIR Massage Stone about choosing the right

hot stones

for a

hot stone massage kit

Source:

isnare.com

Permanent Link:

isnare.com/?aid=1422140&ca=Home+Management

Back To Top